Product Search

Contact Us

Country/Region:Taiwan
Address:10, Yung Ping St.,
Zip/Post Code:236
Tel:886-2-22689333
Fax:886-2-22681772
Email:tonlinserver@hotmail.com
Contact Person:Mr. Chang
Job Title:Manager
Country/Region:Taiwan
Address:10, Yung Ping St.,
Zip/Post Code:236
Tel:886-2-22689333
Fax:886-2-22681772
Email:tonlinserver@hotmail.com
Contact Person:Mr. Chang
Job Title:Manager
Home > Product List > Water purifier / Accessories > Filter series > A  group  of  Year  Filter  /  12  inch  8  into

A group of Year Filter / 12 inch 8 into

Product Specifications:

A group of 12 Year Filter inches / 8 in

RC65-118/5 micron pp Filter ( 12-inch )
1.recommended replacement period is 3 to 4 months
2.using PP MELT BLOWN microfiber fabrication , the special structure within the tight loose outside , large capacity, uniform pore size , can remove water impurities coarse solids such as : iron , hair, sand , sediment and so on.
3.Water temperature not higher than 65 degrees C, filter filter life depends on local water quality and water quantity size.

RC65-119 / coconut shell carbon filter ( 12-inch )
1.recommended replacement period is 5 to 6 months
2.filter tube length : 305mm Maximum flow : 1.0.GPM natural Si Lanka coconut shell with a high adsorption capacity .
3.high removal rate - effectively filter the water chlorine , pesticides, color , trihalomethanes , odors and other organic compounds .
4.Water temperature not higher than 65 degrees C, filter filter life depends on local water quality and water quantity size.

RC65-122/1 micron pp Filter ( 12-inch )
1.recommended replacement period is 5 to 6 months
2.using PP MELT BLOWN microfiber fabrication , the special structure within the tight loose outside , large capacity, uniform pore size , can remove water impurities coarse solids such as : iron , hair, sand , sediment and so on.
3.Water temperature not higher than 65 degrees C, filter filter life depends on local water quality and water quantity size.

Filter replacement procedure described manner
1.Turn off the water supply and power .
2.Close the valve on the storage tank switch .
3.The plate glove into Filter housings, unscrew clockwise direction .
4.Remove the old filter heart , the heart of the new filter into the filter housing .
5.Lock the filter housing counterclockwise back .
6.Restart water, power and storage tank on the ball valve switch .

※ Note 1 : Check the rubber gasket on the filter housing is placed properly .
※ Note 2 : If leaking , check whether there is locking filter housing .